Quick effect superknob for the corresponding deckĪdjusts the pregain for all the sample decks combinedĪdjusts the cue/main mix in the headphone outputĮnable or disable effect units for both decksĪdjusts the channel volume fader for the corresponding deck Toggles microphone talkover, long press for permanent activation
#ROLAND DJ 202 VS TRAKTOR S2 MK3 SOFTWARE#
Otherwise eject trackĪdjusts the hardware gain - it is unlinked to the software main gain since v2.3 If track is playing, CUE default behaviour. If track is loaded into corresponding slot, go to CUE point and play If hotcue is set, seeks the player to hotcue position. Seeks a player to the start and then stops it If the CUE point is set, jump to it and stops Once disabled, playback will resume where the track would have been if it had not entered the loopĪctivate current loop, jump to its loop in point, and stop playbackĬontrol scratching when touched from the top (Missing: temporarily bend the pitch when touched from the side)Īdjust beatgrid so closest beat is aligned with the current play positionĪdjust beatgrid to match another playing deckĪctivates secondary functions when pressed Set a loop of the defined number of beats and enables the loopĪctive sampler mode (for the number buttons)Īctivate hotcue mode (for the number buttons)Īctivates a rolling loop of the defined number of beats. Syncs the phase to that of the other track Press longer to activate master sync on that deck. Syncs the BPM and phase (depending on quantize). Since v2.3 the Master knob is intentionally not linked to Mixxx's Main Gain, following NI's suggestions.Īdd selected track to AutoDJ queue (bottom) Have a look at the corresponding thread in the forums for questions and HINT: Since this controller is a USB-HID device, you might need to set the corresponding udev rules in Linux. Has no impact on the output level or LED brightness ( as opposed to the MK2). The Kontrol S2 MK3Ĭan run from USB bus power, and using a separate power supply
Signals from a computer, so it can work with Mixxx. The MK3 uses the standard HID protocol to send and receive Headphone outputs (1/8" / 3.5 mm TRS) and microphone inputs (1/4" / 6.3 It has two integrated stereo outputs (line and 1/8" / 3.5 mm TRS), The Kontrol S2 MK3 is a two-channel controller with an integrated soundĬard. Native Instruments Traktor Kontrol S2 MK3
0 kommentar(er)
